BowkVR Temporary Shut Down
Hi All,
As you may have seen, I have not been as active as usual. Life / work has been HECTIC lately and so I have not been able to put the time into BowkVR that I would like to. It has gotten to the point where I get stressed rather than happy when an order comes in so I will be shutting down production for a bit to get things in order.
I fully expect that I will re-open orders later this year (how else can I do the Christmas discount) but I just need the next couple of months to get back on top of things.
- Existing orders WILL be fulfilled in the next two weeks
- Existing orders will get a 50% refund (or 100% if they would rather cancel).
I will be designing and releasing files for the Steam Frame once I get my hands on one (and definitely will do a production run of Steam Frame gunstocks / upgrade packs for existing gunstocks).
Thanks for your support over the years.
BowkVR is not going anywhere, I still enjoy designing gunstocks so at MINIMUM will keep doing that for everyone.
This stock is a DIY version of the Signature Series.
The 3D print files are available for personal use - if you would like to print yourself please download from the Discord (link is top right of the website).
For this product:
You are buying ONLY the 3D printed parts
You will have to get the wooden dowel and fasteners.
You will have to cut dowel and assemble yourself
Parts for 18mm and 3/4” dowel are available, please choose the appropriate option.
Build guide can be found through the link at the bottom of this text.
If you would like the Marksman butt, please select this.
The resulting gunstock will be very lightweight and stiff gunstock (final mass depends on dowel used but can be <170 grams). You will also get the classic BowkVR gunstock look (with the kink).
This product has been designed to be as cheap and available as possible - part of that is allowing printing in bulk. This is why you can only buy it in Black currently.
NOTE: Pico 4 and Quest Pro cups are first release and have not had extensive customer feedback. The design does work and has had some testing but exact sizing and orientation may be tweaked (this note was written 23 November 2022)
This stock is a DIY version of the Signature Series.
The 3D print files are available for personal use - if you would like to print yourself please download from the Discord (link is top right of the website).
For this product:
You are buying ONLY the 3D printed parts
You will have to get the wooden dowel and fasteners.
You will have to cut dowel and assemble yourself
Parts for 18mm and 3/4” dowel are available, please choose the appropriate option.
Build guide can be found through the link at the bottom of this text.
If you would like the Marksman butt, please select this.
The resulting gunstock will be very lightweight and stiff gunstock (final mass depends on dowel used but can be <170 grams). You will also get the classic BowkVR gunstock look (with the kink).
This product has been designed to be as cheap and available as possible - part of that is allowing printing in bulk. This is why you can only buy it in Black currently.
NOTE: Pico 4 and Quest Pro cups are first release and have not had extensive customer feedback. The design does work and has had some testing but exact sizing and orientation may be tweaked (this note was written 23 November 2022)